(kicad_pcb (version 20171130) (host pcbnew "(5.1.8)-1") (general (thickness 1.6) (drawings 17) (tracks 29) (zones 0) (modules 69) (nets 56) ) (page A4) (layers (0 F.Cu signal) (31 B.Cu signal) (32 B.Adhes user) (33 F.Adhes user) (34 B.Paste user) (35 F.Paste user) (36 B.SilkS user) (37 F.SilkS user) (38 B.Mask user) (39 F.Mask user) (40 Dwgs.User user) (41 Cmts.User user) (42 Eco1.User user) (43 Eco2.User user) (44 Edge.Cuts user) (45 Margin user) (46 B.CrtYd user) (47 F.CrtYd user) (48 B.Fab user) (49 F.Fab user) ) (setup (last_trace_width 0.25) (trace_clearance 0.2) (zone_clearance 0.508) (zone_45_only no) (trace_min 0.2) (via_size 0.8) (via_drill 0.4) (via_min_size 0.4) (via_min_drill 0.3) (uvia_size 0.3) (uvia_drill 0.1) (uvias_allowed no) (uvia_min_size 0.2) (uvia_min_drill 0.1) (edge_width 0.05) (segment_width 0.2) (pcb_text_width 0.3) (pcb_text_size 1.5 1.5) (mod_edge_width 0.12) (mod_text_size 1 1) (mod_text_width 0.15) (pad_size 1.524 1.524) (pad_drill 0.762) (pad_to_mask_clearance 0) (aux_axis_origin 0 0) (visible_elements 7FFFFFFF) (pcbplotparams (layerselection 0x010fc_ffffffff) (usegerberextensions false) (usegerberattributes true) (usegerberadvancedattributes true) (creategerberjobfile true) (excludeedgelayer true) (linewidth 0.100000) (plotframeref false) (viasonmask false) (mode 1) (useauxorigin false) (hpglpennumber 1) (hpglpenspeed 20) (hpglpendiameter 15.000000) (psnegative false) (psa4output false) (plotreference true) (plotvalue true) (plotinvisibletext false) (padsonsilk false) (subtractmaskfromsilk false) (outputformat 1) (mirror false) (drillshape 1) (scaleselection 1) (outputdirectory "")) ) (net 0 "") (net 1 +12V) (net 2 +5V) (net 3 "Net-(C6-Pad1)") (net 4 "Net-(C7-Pad1)") (net 5 RESET) (net 6 "Net-(C9-Pad1)") (net 7 START) (net 8 STOP) (net 9 MODE) (net 10 DIRECTION) (net 11 RAPID) (net 12 SPEED_CTRL) (net 13 SCK) (net 14 "Net-(D1-Pad1)") (net 15 "Net-(D2-Pad1)") (net 16 LIMIT_RIGHT_MISO) (net 17 LIMIT_LEFT_MOSI) (net 18 "MODE_NO(YELLOW)") (net 19 "MODE_LED-(BLACK)") (net 20 AVCC) (net 21 FTDI_PD1) (net 22 FTDI_PD0) (net 23 "MODE_LED+(RED)") (net 24 "START_NO(YELLOW)") (net 25 "START_LED-(BLACK)") (net 26 "START_LED+(RED)") (net 27 "STOP_NO(YELLOW)") (net 28 "STOP_LED-(BLACK)") (net 29 "STOP_LED+(RED)") (net 30 "RAPID_NO(YELLOW)") (net 31 "RAPID_LED-(BLACK)") (net 32 "RAPID_LED+(RED)") (net 33 "DIRECTION_NO(YELLOW)") (net 34 "DIRECTION_LED-(BLACK)") (net 35 "DIRECTION_LED+(RED)") (net 36 LDIR_LED) (net 37 RAPID_LED) (net 38 RDIR_LED) (net 39 MODE1_LED) (net 40 MODE2_LED) (net 41 MODE3_LED) (net 42 ENA-) (net 43 DIR-) (net 44 PUL-) (net 45 "Net-(R4-Pad2)") (net 46 "Net-(R5-Pad2)") (net 47 "Net-(R6-Pad2)") (net 48 "Net-(R7-Pad2)") (net 49 "Net-(R8-Pad2)") (net 50 "Net-(R9-Pad2)") (net 51 "Net-(U2-Pad22)") (net 52 "Net-(U2-Pad9)") (net 53 "Net-(Y1-Pad4)") (net 54 "Net-(Y1-Pad2)") (net 55 GND) (net_class Default "This is the default net class." (clearance 0.2) (trace_width 0.25) (via_dia 0.8) (via_drill 0.4) (uvia_dia 0.3) (uvia_drill 0.1) (add_net +12V) (add_net +5V) (add_net AVCC) (add_net DIR-) (add_net DIRECTION) (add_net "DIRECTION_LED+(RED)") (add_net "DIRECTION_LED-(BLACK)") (add_net "DIRECTION_NO(YELLOW)") (add_net ENA-) (add_net FTDI_PD0) (add_net FTDI_PD1) (add_net GND) (add_net LDIR_LED) (add_net LIMIT_LEFT_MOSI) (add_net LIMIT_RIGHT_MISO) (add_net MODE) (add_net MODE1_LED) (add_net MODE2_LED) (add_net MODE3_LED) (add_net "MODE_LED+(RED)") (add_net "MODE_LED-(BLACK)") (add_net "MODE_NO(YELLOW)") (add_net "Net-(C6-Pad1)") (add_net "Net-(C7-Pad1)") (add_net "Net-(C9-Pad1)") (add_net "Net-(D1-Pad1)") (add_net "Net-(D2-Pad1)") (add_net "Net-(R4-Pad2)") (add_net "Net-(R5-Pad2)") (add_net "Net-(R6-Pad2)") (add_net "Net-(R7-Pad2)") (add_net "Net-(R8-Pad2)") (add_net "Net-(R9-Pad2)") (add_net "Net-(U2-Pad22)") (add_net "Net-(U2-Pad9)") (add_net "Net-(Y1-Pad2)") (add_net "Net-(Y1-Pad4)") (add_net PUL-) (add_net RAPID) (add_net RAPID_LED) (add_net "RAPID_LED+(RED)") (add_net "RAPID_LED-(BLACK)") (add_net "RAPID_NO(YELLOW)") (add_net RDIR_LED) (add_net RESET) (add_net SCK) (add_net SPEED_CTRL) (add_net START) (add_net "START_LED+(RED)") (add_net "START_LED-(BLACK)") (add_net "START_NO(YELLOW)") (add_net STOP) (add_net "STOP_LED+(RED)") (add_net "STOP_LED-(BLACK)") (add_net "STOP_NO(YELLOW)") ) (module Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm (layer F.Cu) (tedit 5A0FD1B2) (tstamp 66795765) (at 191.305 70.7) (descr "SMD Crystal SERIES SMD3225/4 http://www.txccrystal.com/images/pdf/7m-accuracy.pdf, 3.2x2.5mm^2 package") (tags "SMD SMT crystal") (path /5FB2D054) (attr smd) (fp_text reference Y1 (at 3.005 -0.85) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 16MHZ (at 4.91 0.42 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 2.1 -1.7) (end -2.1 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.1 1.7) (end 2.1 -1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.1 1.7) (end 2.1 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.1 -1.7) (end -2.1 1.7) (layer F.CrtYd) (width 0.05)) (fp_line (start -2 1.65) (end 2 1.65) (layer F.SilkS) (width 0.12)) (fp_line (start -2 -1.65) (end -2 1.65) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 0.25) (end -0.6 1.25) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 -1.25) (end -1.6 -1.25) (layer F.Fab) (width 0.1)) (fp_line (start 1.6 1.25) (end 1.6 -1.25) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 1.25) (end 1.6 1.25) (layer F.Fab) (width 0.1)) (fp_line (start -1.6 -1.25) (end -1.6 1.25) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.7 0.7) (thickness 0.105))) ) (pad 4 smd rect (at -1.1 -0.85) (size 1.4 1.2) (layers F.Cu F.Paste F.Mask) (net 53 "Net-(Y1-Pad4)")) (pad 3 smd rect (at 1.1 -0.85) (size 1.4 1.2) (layers F.Cu F.Paste F.Mask) (net 3 "Net-(C6-Pad1)")) (pad 2 smd rect (at 1.1 0.85) (size 1.4 1.2) (layers F.Cu F.Paste F.Mask) (net 54 "Net-(Y1-Pad2)")) (pad 1 smd rect (at -1.1 0.85) (size 1.4 1.2) (layers F.Cu F.Paste F.Mask) (net 4 "Net-(C7-Pad1)")) (model ${KISYS3DMOD}/Crystal.3dshapes/Crystal_SMD_3225-4Pin_3.2x2.5mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_QFP:TQFP-32_7x7mm_P0.8mm (layer F.Cu) (tedit 5A02F146) (tstamp 66795751) (at 183.115 72.83 180) (descr "32-Lead Plastic Thin Quad Flatpack (PT) - 7x7x1.0 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf)") (tags "QFP 0.8") (path /5FC98DA5) (attr smd) (fp_text reference U2 (at 1.759 2.218) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value ATmega328P-AU (at -0.273 -6.418) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3.625 -3.4) (end -5.05 -3.4) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 -3.625) (end 3.3 -3.625) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 3.625) (end 3.3 3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 3.625) (end -3.3 3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 -3.625) (end -3.3 -3.625) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 3.625) (end -3.625 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 3.625) (end 3.625 3.3) (layer F.SilkS) (width 0.15)) (fp_line (start 3.625 -3.625) (end 3.625 -3.3) (layer F.SilkS) (width 0.15)) (fp_line (start -3.625 -3.625) (end -3.625 -3.4) (layer F.SilkS) (width 0.15)) (fp_line (start -5.3 5.3) (end 5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.3 -5.3) (end 5.3 -5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.3 -5.3) (end 5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -5.3 -5.3) (end -5.3 5.3) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.5 -2.5) (end -2.5 -3.5) (layer F.Fab) (width 0.15)) (fp_line (start -3.5 3.5) (end -3.5 -2.5) (layer F.Fab) (width 0.15)) (fp_line (start 3.5 3.5) (end -3.5 3.5) (layer F.Fab) (width 0.15)) (fp_line (start 3.5 -3.5) (end 3.5 3.5) (layer F.Fab) (width 0.15)) (fp_line (start -2.5 -3.5) (end 3.5 -3.5) (layer F.Fab) (width 0.15)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 32 smd rect (at -2.8 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 44 PUL-)) (pad 31 smd rect (at -2 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 21 FTDI_PD1)) (pad 30 smd rect (at -1.2 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 22 FTDI_PD0)) (pad 29 smd rect (at -0.4 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 5 RESET)) (pad 28 smd rect (at 0.4 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 50 "Net-(R9-Pad2)")) (pad 27 smd rect (at 1.2 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 49 "Net-(R8-Pad2)")) (pad 26 smd rect (at 2 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 48 "Net-(R7-Pad2)")) (pad 25 smd rect (at 2.8 -4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 47 "Net-(R6-Pad2)")) (pad 24 smd rect (at 4.25 -2.8 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 46 "Net-(R5-Pad2)")) (pad 23 smd rect (at 4.25 -2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 45 "Net-(R4-Pad2)")) (pad 22 smd rect (at 4.25 -1.2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 51 "Net-(U2-Pad22)")) (pad 21 smd rect (at 4.25 -0.4 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 55 GND)) (pad 20 smd rect (at 4.25 0.4 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (pad 19 smd rect (at 4.25 1.2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 12 SPEED_CTRL)) (pad 18 smd rect (at 4.25 2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 20 AVCC)) (pad 17 smd rect (at 4.25 2.8 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 13 SCK)) (pad 16 smd rect (at 2.8 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 16 LIMIT_RIGHT_MISO)) (pad 15 smd rect (at 2 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 17 LIMIT_LEFT_MOSI)) (pad 14 smd rect (at 1.2 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 8 STOP)) (pad 13 smd rect (at 0.4 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 7 START)) (pad 12 smd rect (at -0.4 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 11 RAPID)) (pad 11 smd rect (at -1.2 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 9 MODE)) (pad 10 smd rect (at -2 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 10 DIRECTION)) (pad 9 smd rect (at -2.8 4.25 270) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 52 "Net-(U2-Pad9)")) (pad 8 smd rect (at -4.25 2.8 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 3 "Net-(C6-Pad1)")) (pad 7 smd rect (at -4.25 2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 4 "Net-(C7-Pad1)")) (pad 6 smd rect (at -4.25 1.2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (pad 5 smd rect (at -4.25 0.4 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 55 GND)) (pad 4 smd rect (at -4.25 -0.4 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (pad 3 smd rect (at -4.25 -1.2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 55 GND)) (pad 2 smd rect (at -4.25 -2 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 42 ENA-)) (pad 1 smd rect (at -4.25 -2.8 180) (size 1.6 0.55) (layers F.Cu F.Paste F.Mask) (net 43 DIR-)) (model ${KISYS3DMOD}/Package_QFP.3dshapes/TQFP-32_7x7mm_P0.8mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Package_TO_SOT_SMD:SOT-223-3_TabPin2 (layer F.Cu) (tedit 5A02FF57) (tstamp 6679571A) (at 163.83 70.51 270) (descr "module CMS SOT223 4 pins") (tags "CMS SOT") (path /5FADE804) (attr smd) (fp_text reference U1 (at 2.134 4.318 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AMS1117-5.0 (at 0.102 -4.318 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.85 -3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.35) (end 1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.1 -3.41) (end 1.91 -3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -0.85 -3.35) (end 1.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 3.41) (end 1.91 3.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.85 -2.35) (end -1.85 3.35) (layer F.Fab) (width 0.1)) (fp_line (start -1.85 -2.35) (end -0.85 -3.35) (layer F.Fab) (width 0.1)) (fp_line (start -4.4 -3.6) (end -4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start -4.4 3.6) (end 4.4 3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 3.6) (end 4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.4 -3.6) (end -4.4 -3.6) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.91 -3.41) (end 1.91 -2.15) (layer F.SilkS) (width 0.12)) (fp_line (start 1.91 3.41) (end 1.91 2.15) (layer F.SilkS) (width 0.12)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 1 smd rect (at -3.15 -2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 55 GND)) (pad 3 smd rect (at -3.15 2.3 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 1 +12V)) (pad 2 smd rect (at -3.15 0 270) (size 2 1.5) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (pad 2 smd rect (at 3.15 0 270) (size 2 3.8) (layers F.Cu F.Paste F.Mask) (net 2 +5V)) (model ${KISYS3DMOD}/Package_TO_SOT_SMD.3dshapes/SOT-223.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Button_Switch_SMD:SW_Push_1P1T_NO_6x6mm_H9.5mm (layer F.Cu) (tedit 5CA1CA7F) (tstamp 66795704) (at 173.518 83.223 90) (descr "tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm") (tags "tact sw push 6mm smd") (path /5FAFF68A) (attr smd) (fp_text reference SW1 (at 0 -4.05 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value SW_SPST (at -1.105 4.15 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_circle (center 0 0) (end 1.75 -0.05) (layer F.Fab) (width 0.1)) (fp_line (start -3.23 3.23) (end 3.23 3.23) (layer F.SilkS) (width 0.12)) (fp_line (start -3.23 -1.3) (end -3.23 1.3) (layer F.SilkS) (width 0.12)) (fp_line (start -3.23 -3.23) (end 3.23 -3.23) (layer F.SilkS) (width 0.12)) (fp_line (start 3.23 -1.3) (end 3.23 1.3) (layer F.SilkS) (width 0.12)) (fp_line (start -3.23 -3.2) (end -3.23 -3.23) (layer F.SilkS) (width 0.12)) (fp_line (start -3.23 3.23) (end -3.23 3.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.23 3.23) (end 3.23 3.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.23 -3.23) (end 3.23 -3.2) (layer F.SilkS) (width 0.12)) (fp_line (start -5 -3.25) (end 5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -5 3.25) (end 5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -5 -3.25) (end -5 3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 5 3.25) (end 5 -3.25) (layer F.CrtYd) (width 0.05)) (fp_line (start 3 -3) (end -3 -3) (layer F.Fab) (width 0.1)) (fp_line (start 3 3) (end 3 -3) (layer F.Fab) (width 0.1)) (fp_line (start -3 3) (end 3 3) (layer F.Fab) (width 0.1)) (fp_line (start -3 -3) (end -3 3) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 -4.05 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 smd rect (at 3.975 2.25 90) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 55 GND)) (pad 1 smd rect (at 3.975 -2.25 90) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 5 RESET)) (pad 1 smd rect (at -3.975 -2.25 90) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 5 RESET)) (pad 2 smd rect (at -3.975 2.25 90) (size 1.55 1.3) (layers F.Cu F.Paste F.Mask) (net 55 GND)) (model ${KISYS3DMOD}/Button_Switch_SMD.3dshapes/SW_PUSH_6mm_H9.5mm.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667956EA) (at 75.883 156.972) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66892A5C) (attr smd) (fp_text reference R24 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 RAPID)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 "RAPID_NO(YELLOW)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667956D9) (at 75.629 151.638) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66892A38) (attr smd) (fp_text reference R23 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 120R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 32 "RAPID_LED+(RED)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66797DC0) (at 142.177 158.496) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66884E5A) (attr smd) (fp_text reference R22 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 DIRECTION)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "DIRECTION_NO(YELLOW)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667974A4) (at 147.257 157.988) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66884E36) (attr smd) (fp_text reference R21 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 120R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 35 "DIRECTION_LED+(RED)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667956A6) (at 80.709 156.972) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66892A49) (attr smd) (fp_text reference R20 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 30 "RAPID_NO(YELLOW)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795695) (at 142.494 152.146) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66884E47) (attr smd) (fp_text reference R19 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 33 "DIRECTION_NO(YELLOW)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795684) (at 118.301 159.004) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/6687471C) (attr smd) (fp_text reference R18 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 MODE)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 "MODE_NO(YELLOW)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795673) (at 124.397 159.258) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/668746F8) (attr smd) (fp_text reference R17 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 120R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 23 "MODE_LED+(RED)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795662) (at 149.415 102.87) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66866C0B) (attr smd) (fp_text reference R16 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at -2.603 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 STOP)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 "STOP_NO(YELLOW)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66797441) (at 152.717 102.87) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66866BE7) (attr smd) (fp_text reference R15 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 120R (at 3.747 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 29 "STOP_LED+(RED)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795640) (at 149.161 89.789 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66852798) (attr smd) (fp_text reference R14 (at -0.191 1.143) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1K (at 1.587 2.413 270) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 START)) (pad 1 smd roundrect (at -0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 24 "START_NO(YELLOW)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 6679562F) (at 152.591 89.789) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66852774) (attr smd) (fp_text reference R13 (at 0 -1.143) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 120R (at 3.619 -0.127) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 26 "START_LED+(RED)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 6679561E) (at 119.063 153.67) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66874709) (attr smd) (fp_text reference R12 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 18 "MODE_NO(YELLOW)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66797A0F) (at 152.717 104.648) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66866BF8) (attr smd) (fp_text reference R11 (at 0.191 1.524) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 3.239 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 27 "STOP_NO(YELLOW)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667955FC) (at 152.591 91.694 180) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66845948/66852785) (attr smd) (fp_text reference R10 (at 0 -1.27) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at -3.365 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 24 "START_NO(YELLOW)")) (pad 1 smd roundrect (at -0.825 0 180) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667955EB) (at 211.519 44.704) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66AF6166) (attr smd) (fp_text reference R9 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 160R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 50 "Net-(R9-Pad2)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 37 RAPID_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667955DA) (at 212.281 39.116) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66AED82F) (attr smd) (fp_text reference R8 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 160R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 49 "Net-(R8-Pad2)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 41 MODE3_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667955C9) (at 212.027 33.528) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66AE4F25) (attr smd) (fp_text reference R7 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 160R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 48 "Net-(R7-Pad2)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 40 MODE2_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667955B8) (at 212.535 28.448) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66ADCB01) (attr smd) (fp_text reference R6 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 160R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 47 "Net-(R6-Pad2)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 39 MODE1_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667955A7) (at 212.281 23.622) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66ACBD09) (attr smd) (fp_text reference R5 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 160R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 46 "Net-(R5-Pad2)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 38 RDIR_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795596) (at 212.281 19.05) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /66AB0B3D) (attr smd) (fp_text reference R4 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 160R (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 45 "Net-(R4-Pad2)")) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 36 LDIR_LED)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795585) (at 176.085 66.548) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5FD5600E) (attr smd) (fp_text reference R3 (at 2.731 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 270R (at 2.223 -1.524) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.825 0) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 15 "Net-(D2-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795574) (at 193.548 77.915 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5FD85CE4) (attr smd) (fp_text reference R2 (at -2.349 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 270R (at -0.317 1.524 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 14 "Net-(D1-Pad1)")) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Resistor_SMD:R_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795563) (at 168.148 80.073 90) (descr "Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags resistor) (path /5FB008E6) (attr smd) (fp_text reference R1 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10K (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.237258 0.5225) (end 0.237258 0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start -0.237258 -0.5225) (end 0.237258 -0.5225) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4125) (end -0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4125) (end 0.8 0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4125) (end 0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4125) (end -0.8 -0.4125) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 RESET)) (pad 1 smd roundrect (at -0.825 0 90) (size 0.8 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Resistor_SMD.3dshapes/R_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795552) (at 204.47 90.17 270) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66C05F54) (fp_text reference J23 (at 7.62 -3.81 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 2.5 4.6 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 270) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 42 ENA-)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 43 DIR-)) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 44 PUL-)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795527) (at 269.494 34.798) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66CBB5DB) (fp_text reference J22 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 41 MODE3_LED)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667954FD) (at 249.428 34.036) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66CB439B) (fp_text reference J21 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 40 MODE2_LED)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667954D3) (at 229.108 33.274) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66C6C0F6) (fp_text reference J20 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 39 MODE1_LED)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667954A9) (at 188.508 34.036) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66C5BE74) (fp_text reference J19 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 38 RDIR_LED)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 6679547F) (at 157.52 34.798) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66CCD0B2) (fp_text reference J18 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 37 RAPID_LED)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795455) (at 173.268 33.274) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66C288C9) (fp_text reference J17 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Female (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 36 LDIR_LED)) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 6679542B) (at 194.945 90.17 270) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/669CA097) (fp_text reference J16 (at 2.5 -3.55 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 2.5 4.6 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 270) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 2 +5V)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 12 SPEED_CTRL)) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795400) (at 143.296 165.608) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B8FD15) (fp_text reference J15 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 35 "DIRECTION_LED+(RED)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 34 "DIRECTION_LED-(BLACK)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667953D6) (at 141.558 178.308) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B8FD0F) (fp_text reference J14 (at 2.5 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 2.5 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 33 "DIRECTION_NO(YELLOW)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 34 "DIRECTION_LED-(BLACK)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667953AB) (at 76.748 166.37) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B93A4E) (fp_text reference J13 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 32 "RAPID_LED+(RED)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 31 "RAPID_LED-(BLACK)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795381) (at 75.946 179.578) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B93A48) (fp_text reference J12 (at 2.5 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 2.5 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 30 "RAPID_NO(YELLOW)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 31 "RAPID_LED-(BLACK)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795356) (at 151.511 96.012 270) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B862D4) (fp_text reference J11 (at 2.794 1.905 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at 1.25 4.6 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 270) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 29 "STOP_LED+(RED)")) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 28 "STOP_LED-(BLACK)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 6679532C) (at 144.399 96.012 270) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B862CE) (fp_text reference J10 (at 2.5 -3.55 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 2.032 2.159 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 270) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 27 "STOP_NO(YELLOW)")) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 28 "STOP_LED-(BLACK)")) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 66795301) (at 151.511 82.804 270) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B7A8BF) (fp_text reference J9 (at 4.064 -0.889 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at -3.81 3.81) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 270) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 26 "START_LED+(RED)")) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 25 "START_LED-(BLACK)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667952D7) (at 144.399 82.884 270) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B78F58) (fp_text reference J8 (at 5 2.413 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 3.476 -1.651 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 270) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 24 "START_NO(YELLOW)")) (pad 2 thru_hole oval (at 2.5 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 25 "START_LED-(BLACK)")) (pad 1 thru_hole roundrect (at 0 0 270) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667952AC) (at 120.904 166.878) (descr "JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B8C2D2) (fp_text reference J7 (at 1.25 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at 1.25 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 2.75) (end 1.25 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 4.3 -0.2) (end 4.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -0.2) (end 4.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 1.25 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -2.45) (end 3.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.05 -1.7) (end 5.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -1.7) (end 5.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 3.25 -2.45) (end 3.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.7) (end 1.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 1.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 5.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.45 3.9) (end 5.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 5.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 5.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 5.06 3.51) (end 5.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 5.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 4.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 4.95 3.4) (end 4.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 4.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.25 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (net 23 "MODE_LED+(RED)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 2) (drill 1) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 19 "MODE_LED-(BLACK)")) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical (layer F.Cu) (tedit 5A19A430) (tstamp 66795282) (at 201.168 68.58) (descr "Through hole straight socket strip, 1x06, 2.54mm pitch, single row (from Kicad 4.0.7), script generated") (tags "Through hole socket strip THT 1x06 2.54mm single row") (path /5FCD1D85) (fp_text reference J6 (at 0 -2.77) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x06_Female (at 3.048 6.604 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -1.8 14.45) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 14.45) (end -1.8 14.45) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.75 -1.8) (end 1.75 14.45) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end 1.75 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 0 -1.33) (end 1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 -1.33) (end 1.33 0) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 14.03) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 14.03) (end 1.33 14.03) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 14.03) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 13.97) (end -1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 13.97) (end -1.27 13.97) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -0.635) (end 1.27 13.97) (layer F.Fab) (width 0.1)) (fp_line (start 0.635 -1.27) (end 1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 -1.27) (end 0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 6.35 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 6 thru_hole oval (at 0 12.7) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 6 "Net-(C9-Pad1)")) (pad 5 thru_hole oval (at 0 10.16) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 21 FTDI_PD1)) (pad 4 thru_hole oval (at 0 7.62) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 22 FTDI_PD0)) (pad 3 thru_hole oval (at 0 5.08) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 +5V)) (pad 2 thru_hole oval (at 0 2.54) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 55 GND)) (pad 1 thru_hole rect (at 0 0) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 55 GND)) (model ${KISYS3DMOD}/Connector_PinSocket_2.54mm.3dshapes/PinSocket_1x06_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal (layer F.Cu) (tedit 59FED5CB) (tstamp 66795268) (at 151.13 76.2 180) (descr "Through hole angled pin header, 1x02, 2.54mm pitch, 6mm pin length, single row") (tags "Through hole angled pin header THT 1x02 2.54mm single row") (path /66D4B5F2) (fp_text reference J5 (at 4.385 5.08) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at 3.302 -2.54) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 10.55 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.55 4.35) (end 10.55 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 4.35) (end 10.55 4.35) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.27 -1.27) (end 0 -1.27) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 0) (end -1.27 -1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.042929 2.92) (end 1.44 2.92) (layer F.SilkS) (width 0.12)) (fp_line (start 1.042929 2.16) (end 1.44 2.16) (layer F.SilkS) (width 0.12)) (fp_line (start 10.1 2.92) (end 4.1 2.92) (layer F.SilkS) (width 0.12)) (fp_line (start 10.1 2.16) (end 10.1 2.92) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 2.16) (end 10.1 2.16) (layer F.SilkS) (width 0.12)) (fp_line (start 1.44 1.27) (end 4.1 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.11 0.38) (end 1.44 0.38) (layer F.SilkS) (width 0.12)) (fp_line (start 1.11 -0.38) (end 1.44 -0.38) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 0.28) (end 10.1 0.28) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 0.16) (end 10.1 0.16) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 0.04) (end 10.1 0.04) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 -0.08) (end 10.1 -0.08) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 -0.2) (end 10.1 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 -0.32) (end 10.1 -0.32) (layer F.SilkS) (width 0.12)) (fp_line (start 10.1 0.38) (end 4.1 0.38) (layer F.SilkS) (width 0.12)) (fp_line (start 10.1 -0.38) (end 10.1 0.38) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 -0.38) (end 10.1 -0.38) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 -1.33) (end 1.44 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 4.1 3.87) (end 4.1 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 1.44 3.87) (end 4.1 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start 1.44 -1.33) (end 1.44 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start 4.04 2.86) (end 10.04 2.86) (layer F.Fab) (width 0.1)) (fp_line (start 10.04 2.22) (end 10.04 2.86) (layer F.Fab) (width 0.1)) (fp_line (start 4.04 2.22) (end 10.04 2.22) (layer F.Fab) (width 0.1)) (fp_line (start -0.32 2.86) (end 1.5 2.86) (layer F.Fab) (width 0.1)) (fp_line (start -0.32 2.22) (end -0.32 2.86) (layer F.Fab) (width 0.1)) (fp_line (start -0.32 2.22) (end 1.5 2.22) (layer F.Fab) (width 0.1)) (fp_line (start 4.04 0.32) (end 10.04 0.32) (layer F.Fab) (width 0.1)) (fp_line (start 10.04 -0.32) (end 10.04 0.32) (layer F.Fab) (width 0.1)) (fp_line (start 4.04 -0.32) (end 10.04 -0.32) (layer F.Fab) (width 0.1)) (fp_line (start -0.32 0.32) (end 1.5 0.32) (layer F.Fab) (width 0.1)) (fp_line (start -0.32 -0.32) (end -0.32 0.32) (layer F.Fab) (width 0.1)) (fp_line (start -0.32 -0.32) (end 1.5 -0.32) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 -0.635) (end 2.135 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start 1.5 3.81) (end 1.5 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 4.04 3.81) (end 1.5 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 4.04 -1.27) (end 4.04 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 2.135 -1.27) (end 4.04 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.77 1.27 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 55 GND)) (pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 1 +12V)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Horizontal.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 66795235) (at 186.436 82.296 90) (descr "Through hole straight pin header, 1x02, 2.54mm pitch, single row") (tags "Through hole pin header THT 1x02 2.54mm single row") (path /5FB12A73) (fp_text reference J4 (at 0 -2.33 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x02_Male (at -2.54 1.524 180) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.8 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.8 4.35) (end 1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 4.35) (end 1.8 4.35) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 4.35) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.33 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 1.33 1.27) (end 1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 3.87) (end 1.33 3.87) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 -0.635) (end -0.635 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 3.81) (end -1.27 -0.635) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 3.81) (end -1.27 3.81) (layer F.Fab) (width 0.1)) (fp_line (start 1.27 -1.27) (end 1.27 3.81) (layer F.Fab) (width 0.1)) (fp_line (start -0.635 -1.27) (end 1.27 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 1.27) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 2 thru_hole oval (at 0 2.54 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 +5V)) (pad 1 thru_hole rect (at 0 0 90) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 20 AVCC)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_1x02_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 6679521F) (at 119.888 177.546) (descr "JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66845948/66B8C2CC) (fp_text reference J3 (at 2.5 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value Conn_01x03_Male (at 2.5 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 2.75) (end 2.5 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 6.8 -0.2) (end 6.8 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -0.2) (end 6.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 2.5 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -2.45) (end 5.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 7.55 -1.7) (end 7.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -1.7) (end 7.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 5.75 -2.45) (end 5.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 4.25 -1.7) (end 4.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 4.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.95 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.95 3.9) (end 7.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 7.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 7.56 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 7.56 3.51) (end 7.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 7.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 7.45 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 7.45 3.4) (end 7.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 7.45 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 2.5 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 3 thru_hole oval (at 5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 18 "MODE_NO(YELLOW)")) (pad 2 thru_hole oval (at 2.5 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 19 "MODE_LED-(BLACK)")) (pad 1 thru_hole roundrect (at 0 0) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 55 GND)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical (layer F.Cu) (tedit 59FED5CC) (tstamp 667951F4) (at 174.752 75.184 180) (descr "Through hole straight pin header, 2x03, 2.54mm pitch, double rows") (tags "Through hole pin header THT 2x03 2.54mm double row") (path /5FABE011) (fp_text reference J2 (at 1.27 -2.33) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value AVR-ISP-6 (at -2.54 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 4.35 -1.8) (end -1.8 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start 4.35 6.85) (end 4.35 -1.8) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 6.85) (end 4.35 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.8 -1.8) (end -1.8 6.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.33 -1.33) (end 0 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 0) (end -1.33 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 1.27 -1.33) (end 3.87 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start 1.27 1.27) (end 1.27 -1.33) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end 1.27 1.27) (layer F.SilkS) (width 0.12)) (fp_line (start 3.87 -1.33) (end 3.87 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 1.27) (end -1.33 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.33 6.41) (end 3.87 6.41) (layer F.SilkS) (width 0.12)) (fp_line (start -1.27 0) (end 0 -1.27) (layer F.Fab) (width 0.1)) (fp_line (start -1.27 6.35) (end -1.27 0) (layer F.Fab) (width 0.1)) (fp_line (start 3.81 6.35) (end -1.27 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 3.81 -1.27) (end 3.81 6.35) (layer F.Fab) (width 0.1)) (fp_line (start 0 -1.27) (end 3.81 -1.27) (layer F.Fab) (width 0.1)) (fp_text user %R (at 1.27 2.54 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad 6 thru_hole oval (at 2.54 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 55 GND)) (pad 5 thru_hole oval (at 0 5.08 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 5 RESET)) (pad 4 thru_hole oval (at 2.54 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 17 LIMIT_LEFT_MOSI)) (pad 3 thru_hole oval (at 0 2.54 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 13 SCK)) (pad 2 thru_hole oval (at 2.54 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 2 +5V)) (pad 1 thru_hole rect (at 0 0 180) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask) (net 16 LIMIT_RIGHT_MISO)) (model ${KISYS3DMOD}/Connector_PinHeader_2.54mm.3dshapes/PinHeader_2x03_P2.54mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Connector_JST:JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical (layer F.Cu) (tedit 5C28146E) (tstamp 667951D8) (at 201.422 104.394 180) (descr "JST XH series connector, B4B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator") (tags "connector JST XH vertical boss") (path /66924857) (fp_text reference J1 (at 3.75 -3.55) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value LIMIT_BREAKOUT (at 3.75 4.6) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -2.85 -2.75) (end -2.85 -1.5) (layer F.SilkS) (width 0.12)) (fp_line (start -1.6 -2.75) (end -2.85 -2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 2.75) (end 3.75 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 9.3 -0.2) (end 9.3 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -0.2) (end 9.3 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 3.75 2.75) (end -0.74 2.75) (layer F.SilkS) (width 0.12)) (fp_line (start -1.8 -0.2) (end -1.8 1.14) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -0.2) (end -1.8 -0.2) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -2.45) (end 8.25 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 10.05 -1.7) (end 10.05 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -1.7) (end 10.05 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 8.25 -2.45) (end 8.25 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -2.45) (end -2.55 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -0.75 -1.7) (end -0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -1.7) (end -0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start -2.55 -2.45) (end -2.55 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -2.45) (end 0.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 6.75 -1.7) (end 6.75 -2.45) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -1.7) (end 6.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0.75 -2.45) (end 0.75 -1.7) (layer F.SilkS) (width 0.12)) (fp_line (start 0 -1.35) (end 0.625 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -0.625 -2.35) (end 0 -1.35) (layer F.Fab) (width 0.1)) (fp_line (start 10.45 -2.85) (end -2.95 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.45 3.9) (end 10.45 -2.85) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 3.9) (end 10.45 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.95 -2.85) (end -2.95 3.9) (layer F.CrtYd) (width 0.05)) (fp_line (start 10.06 -2.46) (end -2.56 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start 10.06 3.51) (end 10.06 -2.46) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 3.51) (end 10.06 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.56 -2.46) (end -2.56 3.51) (layer F.SilkS) (width 0.12)) (fp_line (start 9.95 -2.35) (end -2.45 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start 9.95 3.4) (end 9.95 -2.35) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 3.4) (end 9.95 3.4) (layer F.Fab) (width 0.1)) (fp_line (start -2.45 -2.35) (end -2.45 3.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 3.75 2.7) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (pad "" np_thru_hole circle (at -1.6 2 180) (size 1.2 1.2) (drill 1.2) (layers *.Cu *.Mask)) (pad 4 thru_hole oval (at 7.5 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 16 LIMIT_RIGHT_MISO)) (pad 3 thru_hole oval (at 5 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 55 GND)) (pad 2 thru_hole oval (at 2.5 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (net 17 LIMIT_LEFT_MOSI)) (pad 1 thru_hole roundrect (at 0 0 180) (size 1.7 1.95) (drill 0.95) (layers *.Cu *.Mask) (roundrect_rratio 0.147059) (net 2 +5V)) (model ${KISYS3DMOD}/Connector_JST.3dshapes/JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5F68FEF1) (tstamp 667951AC) (at 172.9485 66.548 180) (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags LED) (path /5FD4CC38) (attr smd) (fp_text reference D2 (at 2.7685 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value GRNLED (at 0.7875 1.524) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (pad 1 smd roundrect (at -0.7875 0 180) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 15 "Net-(D2-Pad1)")) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module LED_SMD:LED_0603_1608Metric (layer F.Cu) (tedit 5F68FEF1) (tstamp 66795199) (at 190.5 78.0035 90) (descr "LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator") (tags LED) (path /5FD85875) (attr smd) (fp_text reference D1 (at 0.7875 -1.524 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value REDLED (at -0.7365 1.524 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.485 0.735) (end 0.8 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start -1.485 -0.735) (end -1.485 0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 -0.735) (end -1.485 -0.735) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.1) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.5 -0.4) (end -0.8 -0.1) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end -0.5 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 13 SCK)) (pad 1 smd roundrect (at -0.7875 0 90) (size 0.875 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 14 "Net-(D1-Pad1)")) (model ${KISYS3DMOD}/LED_SMD.3dshapes/LED_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795186) (at 196.075 86.36) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66845948/668EC527) (attr smd) (fp_text reference C16 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1nF (at -3.035 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 12 SPEED_CTRL)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795175) (at 81.28 151.638) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66845948/66892A4F) (attr smd) (fp_text reference C15 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 11 RAPID)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795164) (at 147.307 152.146) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66845948/66884E4D) (attr smd) (fp_text reference C14 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 10 DIRECTION)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795153) (at 124.193 152.654) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66845948/6687470F) (attr smd) (fp_text reference C13 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 9 MODE)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795142) (at 149.365 104.648) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66845948/66866BFE) (attr smd) (fp_text reference C12 (at 0 1.524) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at -3.569 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at -0.013 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 8 STOP)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795131) (at 149.212 91.694 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66845948/6685278B) (attr smd) (fp_text reference C11 (at -0.14 -1.27) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 3.416 -1.524) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 7 START)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 66795120) (at 185.687 66.548) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /66A0F038) (attr smd) (fp_text reference C10 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 6679510F) (at 201.409 83.82 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FD298A3) (attr smd) (fp_text reference C9 (at 2.807 0) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 -1.524) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 5 RESET)) (pad 1 smd roundrect (at -0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 6 "Net-(C9-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667950FE) (at 169.672 72.885 90) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FB77FF0) (attr smd) (fp_text reference C8 (at -2.781 0 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 3.797 0 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 90) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0 90) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667950ED) (at 191.63 73.406 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FAE0DFC) (attr smd) (fp_text reference C7 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 22pF (at -3.81 0) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 4 "Net-(C7-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667950DC) (at 191.63 67.945 180) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FB197C5) (attr smd) (fp_text reference C6 (at 0 1.27) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 22pF (at -3.315 0.635) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0 180) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 3 "Net-(C6-Pad1)")) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667950CB) (at 182.131 66.548) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FB254DC) (attr smd) (fp_text reference C5 (at 0 -1.43) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 1.43) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667950BA) (at 166.37 76.975 270) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FB375AF) (attr smd) (fp_text reference C4 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 0.1uF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_0603_1608Metric (layer F.Cu) (tedit 5F68FEEE) (tstamp 667950A9) (at 161.29 76.975 270) (descr "Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") (tags capacitor) (path /5FB394C4) (attr smd) (fp_text reference C3 (at 0 -1.43 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 1uF (at 0 1.43 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 1.48 0.73) (end -1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start 1.48 -0.73) (end 1.48 0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 -0.73) (end 1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.48 0.73) (end -1.48 -0.73) (layer F.CrtYd) (width 0.05)) (fp_line (start -0.14058 0.51) (end 0.14058 0.51) (layer F.SilkS) (width 0.12)) (fp_line (start -0.14058 -0.51) (end 0.14058 -0.51) (layer F.SilkS) (width 0.12)) (fp_line (start 0.8 0.4) (end -0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start 0.8 -0.4) (end 0.8 0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 -0.4) (end 0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_line (start -0.8 0.4) (end -0.8 -0.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.4 0.4) (thickness 0.06))) ) (pad 2 smd roundrect (at 0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 55 GND)) (pad 1 smd roundrect (at -0.775 0 270) (size 0.9 0.95) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.25) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_0603_1608Metric.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_Tantalum_SMD:CP_EIA-3528-21_Kemet-B (layer F.Cu) (tedit 5EBA9318) (tstamp 66795098) (at 156.21 75.9325 270) (descr "Tantalum Capacitor SMD Kemet-B (3528-21 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator") (tags "capacitor tantalum") (path /5FAE0133) (attr smd) (fp_text reference C2 (at 0 -2.35 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 22uF (at 0 2.35 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start 2.45 1.65) (end -2.45 1.65) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.45 -1.65) (end 2.45 1.65) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 -1.65) (end 2.45 -1.65) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.45 1.65) (end -2.45 -1.65) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.46 1.51) (end 1.75 1.51) (layer F.SilkS) (width 0.12)) (fp_line (start -2.46 -1.51) (end -2.46 1.51) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 -1.51) (end -2.46 -1.51) (layer F.SilkS) (width 0.12)) (fp_line (start 1.75 1.4) (end 1.75 -1.4) (layer F.Fab) (width 0.1)) (fp_line (start -1.75 1.4) (end 1.75 1.4) (layer F.Fab) (width 0.1)) (fp_line (start -1.75 -0.7) (end -1.75 1.4) (layer F.Fab) (width 0.1)) (fp_line (start -1.05 -1.4) (end -1.75 -0.7) (layer F.Fab) (width 0.1)) (fp_line (start 1.75 -1.4) (end -1.05 -1.4) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.88 0.88) (thickness 0.13))) ) (pad 2 smd roundrect (at 1.5375 0 270) (size 1.325 2.35) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.188679) (net 55 GND)) (pad 1 smd roundrect (at -1.5375 0 270) (size 1.325 2.35) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.188679) (net 2 +5V)) (model ${KISYS3DMOD}/Capacitor_Tantalum_SMD.3dshapes/CP_EIA-3528-21_Kemet-B.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (module Capacitor_SMD:C_Elec_4x5.4 (layer F.Cu) (tedit 5BC8D926) (tstamp 66795085) (at 156.21 68.985 90) (descr "SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.4mm") (tags "capacitor electrolyic nonpolar") (path /5FAF4F8E) (attr smd) (fp_text reference C1 (at 0 -3.2 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (fp_text value 10uF (at 0 3.2 90) (layer F.Fab) (effects (font (size 1 1) (thickness 0.15))) ) (fp_line (start -3.25 1.05) (end -2.4 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -3.25 -1.05) (end -3.25 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.05) (end -3.25 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 1.05) (end -2.4 1.25) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.25) (end -2.4 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 -1.25) (end -1.25 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.4 1.25) (end -1.25 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 -2.4) (end 2.4 -2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start -1.25 2.4) (end 2.4 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 1.05) (end 2.4 2.4) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.25 1.05) (end 2.4 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 3.25 -1.05) (end 3.25 1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 -1.05) (end 3.25 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start 2.4 -2.4) (end 2.4 -1.05) (layer F.CrtYd) (width 0.05)) (fp_line (start -2.26 1.195563) (end -1.195563 2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 -1.195563) (end -1.195563 -2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 -1.195563) (end -2.26 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.26 1.195563) (end -2.26 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -1.195563 2.26) (end 2.26 2.26) (layer F.SilkS) (width 0.12)) (fp_line (start -1.195563 -2.26) (end 2.26 -2.26) (layer F.SilkS) (width 0.12)) (fp_line (start 2.26 -2.26) (end 2.26 -1.06) (layer F.SilkS) (width 0.12)) (fp_line (start 2.26 2.26) (end 2.26 1.06) (layer F.SilkS) (width 0.12)) (fp_line (start -2.15 1.15) (end -1.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 -1.15) (end -1.15 -2.15) (layer F.Fab) (width 0.1)) (fp_line (start -2.15 -1.15) (end -2.15 1.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.15 2.15) (end 2.15 2.15) (layer F.Fab) (width 0.1)) (fp_line (start -1.15 -2.15) (end 2.15 -2.15) (layer F.Fab) (width 0.1)) (fp_line (start 2.15 -2.15) (end 2.15 2.15) (layer F.Fab) (width 0.1)) (fp_circle (center 0 0) (end 2 0) (layer F.Fab) (width 0.1)) (fp_text user %R (at 0 0 90) (layer F.Fab) (effects (font (size 0.8 0.8) (thickness 0.12))) ) (pad 2 smd roundrect (at 1.675 0 90) (size 2.65 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 55 GND)) (pad 1 smd roundrect (at -1.675 0 90) (size 2.65 1.6) (layers F.Cu F.Paste F.Mask) (roundrect_rratio 0.15625) (net 1 +12V)) (model ${KISYS3DMOD}/Capacitor_SMD.3dshapes/C_Elec_4x5.4.wrl (at (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)) ) ) (gr_text "LIMITS\n" (at 198.12 99.695) (layer F.SilkS) (tstamp 66798808) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text STEPPER (at 208.28 92.71 90) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text LDIR_LED (at 174.752 24.384) (layer F.SilkS) (tstamp 667983FE) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text MODE1_LED (at 230.124 25.4) (layer F.SilkS) (tstamp 6679837A) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text MODE2_LED (at 250.19 25.146) (layer F.SilkS) (tstamp 66798320) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text RDIR_LED (at 189.484 25.908) (layer F.SilkS) (tstamp 66798275) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text MODE3_LED (at 272.288 26.924) (layer F.SilkS) (tstamp 6679814C) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text LED_RAPID (at 157.988 25.654) (layer F.SilkS) (effects (font (size 1 1) (thickness 0.15))) ) (gr_text DIR (at 145.542 144.78) (layer F.SilkS) (tstamp 66797D8A) (effects (font (size 2 2) (thickness 0.25))) ) (gr_text MODE (at 120.396 144.78) (layer F.SilkS) (tstamp 66797D86) (effects (font (size 2 2) (thickness 0.25))) ) (gr_text "RAPID\n" (at 78.486 143.51) (layer F.SilkS) (tstamp 66797CDB) (effects (font (size 2 2) (thickness 0.25))) ) (gr_text "STOP\n" (at 155.702 97.536 270) (layer F.SilkS) (tstamp 66797BE1) (effects (font (size 2 2) (thickness 0.25))) ) (gr_text "START\n" (at 155.702 84.074 270) (layer F.SilkS) (tstamp 66797BEC) (effects (font (size 2 2) (thickness 0.25))) ) (gr_line (start 210.7 110.5) (end 139.7 110.5) (layer Edge.Cuts) (width 0.05) (tstamp 667960DB)) (gr_line (start 210.7 63.5) (end 210.7 110.5) (layer Edge.Cuts) (width 0.1)) (gr_line (start 139.7 63.5) (end 210.7 63.5) (layer Edge.Cuts) (width 0.1)) (gr_line (start 139.7 63.5) (end 139.7 110.5) (layer Edge.Cuts) (width 0.1)) (via (at 142.748 66.548) (size 5) (drill 4.5) (layers F.Cu B.Cu) (net 0)) (via (at 207.7 66.548) (size 5) (drill 4.5) (layers F.Cu B.Cu) (net 0)) (via (at 207.7 107.548) (size 5) (drill 4.5) (layers F.Cu B.Cu) (net 0)) (via (at 142.748 107.548) (size 5) (drill 4.5) (layers F.Cu B.Cu) (net 0)) (segment (start 153.67 72.39) (end 155.4 70.66) (width 0.5) (layer F.Cu) (net 1)) (segment (start 153.67 74.93) (end 153.67 72.39) (width 0.5) (layer F.Cu) (net 1)) (segment (start 152.4 76.2) (end 153.67 74.93) (width 0.5) (layer F.Cu) (net 1)) (segment (start 155.4 70.66) (end 156.21 70.66) (width 0.25) (layer F.Cu) (net 1)) (segment (start 151.13 76.2) (end 152.4 76.2) (width 0.5) (layer F.Cu) (net 1)) (segment (start 159.51 67.36) (end 156.21 70.66) (width 0.5) (layer F.Cu) (net 1)) (segment (start 161.53 67.36) (end 159.51 67.36) (width 0.5) (layer F.Cu) (net 1)) (segment (start 159.485 74.395) (end 161.29 76.2) (width 0.5) (layer F.Cu) (net 2)) (segment (start 156.21 74.395) (end 159.485 74.395) (width 0.5) (layer F.Cu) (net 2)) (segment (start 161.29 76.2) (end 163.83 73.66) (width 0.5) (layer F.Cu) (net 2)) (segment (start 166.37 76.2) (end 163.83 73.66) (width 0.5) (layer F.Cu) (net 2)) (segment (start 163.83 67.36) (end 163.83 70.866) (width 0.5) (layer F.Cu) (net 2)) (segment (start 163.83 70.866) (end 166.37 70.866) (width 0.25) (layer F.Cu) (net 2)) (segment (start 163.83 70.866) (end 163.83 73.66) (width 0.5) (layer F.Cu) (net 2)) (segment (start 170.688 66.548) (end 172.161 66.548) (width 0.25) (layer F.Cu) (net 2)) (segment (start 166.37 70.866) (end 170.688 66.548) (width 0.25) (layer F.Cu) (net 2)) (segment (start 168.148 80.898) (end 166.75 80.898) (width 0.25) (layer F.Cu) (net 2)) (segment (start 164.084 78.232) (end 164.084 76.2) (width 0.25) (layer F.Cu) (net 2)) (segment (start 166.75 80.898) (end 164.084 78.232) (width 0.25) (layer F.Cu) (net 2)) (segment (start 164.084 76.2) (end 161.29 76.2) (width 0.5) (layer F.Cu) (net 2)) (segment (start 166.37 76.2) (end 164.084 76.2) (width 0.5) (layer F.Cu) (net 2)) (segment (start 168.148 79.248) (end 171.268 79.248) (width 0.25) (layer F.Cu) (net 5)) (segment (start 201.168 82.804) (end 202.184 83.82) (width 0.25) (layer F.Cu) (net 6)) (segment (start 201.168 81.28) (end 201.168 82.804) (width 0.25) (layer F.Cu) (net 6)) (segment (start 173.736 66.548) (end 175.26 66.548) (width 0.25) (layer F.Cu) (net 15)) (zone (net 55) (net_name GND) (layer F.Cu) (tstamp 0) (hatch edge 0.508) (connect_pads (clearance 0.508)) (min_thickness 0.254) (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508)) (polygon (pts (xy 209.55 109.22) (xy 140.97 109.22) (xy 140.97 64.77) (xy 209.55 64.77) ) ) (filled_polygon (pts (xy 204.921799 65.063021) (xy 204.685476 65.633554) (xy 204.565 66.239229) (xy 204.565 66.856771) (xy 204.685476 67.462446) (xy 204.921799 68.032979) (xy 205.264886 68.546446) (xy 205.701554 68.983114) (xy 206.215021 69.326201) (xy 206.785554 69.562524) (xy 207.391229 69.683) (xy 208.008771 69.683) (xy 208.614446 69.562524) (xy 209.184979 69.326201) (xy 209.423 69.167161) (xy 209.423 104.928839) (xy 209.184979 104.769799) (xy 208.614446 104.533476) (xy 208.008771 104.413) (xy 207.391229 104.413) (xy 206.785554 104.533476) (xy 206.215021 104.769799) (xy 205.701554 105.112886) (xy 205.264886 105.549554) (xy 204.921799 106.063021) (xy 204.685476 106.633554) (xy 204.565 107.239229) (xy 204.565 107.856771) (xy 204.685476 108.462446) (xy 204.921799 109.032979) (xy 204.961904 109.093) (xy 145.486096 109.093) (xy 145.526201 109.032979) (xy 145.762524 108.462446) (xy 145.883 107.856771) (xy 145.883 107.239229) (xy 145.762524 106.633554) (xy 145.526201 106.063021) (xy 145.183114 105.549554) (xy 144.746446 105.112886) (xy 144.232979 104.769799) (xy 143.662446 104.533476) (xy 143.056771 104.413) (xy 142.439229 104.413) (xy 141.833554 104.533476) (xy 141.263021 104.769799) (xy 141.097 104.88073) (xy 141.097 78.1325) (xy 154.396928 78.1325) (xy 154.409188 78.256982) (xy 154.445498 78.37668) (xy 154.504463 78.486994) (xy 154.583815 78.583685) (xy 154.680506 78.663037) (xy 154.79082 78.722002) (xy 154.910518 78.758312) (xy 155.035 78.770572) (xy 155.92425 78.7675) (xy 156.083 78.60875) (xy 156.083 77.597) (xy 156.337 77.597) (xy 156.337 78.60875) (xy 156.49575 78.7675) (xy 157.385 78.770572) (xy 157.509482 78.758312) (xy 157.62918 78.722002) (xy 157.739494 78.663037) (xy 157.836185 78.583685) (xy 157.915537 78.486994) (xy 157.974502 78.37668) (xy 158.010812 78.256982) (xy 158.016424 78.2) (xy 160.176928 78.2) (xy 160.189188 78.324482) (xy 160.225498 78.44418) (xy 160.284463 78.554494) (xy 160.363815 78.651185) (xy 160.460506 78.730537) (xy 160.57082 78.789502) (xy 160.690518 78.825812) (xy 160.815 78.838072) (xy 161.00425 78.835) (xy 161.163 78.67625) (xy 161.163 77.877) (xy 161.417 77.877) (xy 161.417 78.67625) (xy 161.57575 78.835) (xy 161.765 78.838072) (xy 161.889482 78.825812) (xy 162.00918 78.789502) (xy 162.119494 78.730537) (xy 162.216185 78.651185) (xy 162.295537 78.554494) (xy 162.354502 78.44418) (xy 162.390812 78.324482) (xy 162.403072 78.2) (xy 165.256928 78.2) (xy 165.269188 78.324482) (xy 165.305498 78.44418) (xy 165.364463 78.554494) (xy 165.443815 78.651185) (xy 165.540506 78.730537) (xy 165.65082 78.789502) (xy 165.770518 78.825812) (xy 165.895 78.838072) (xy 166.08425 78.835) (xy 166.243 78.67625) (xy 166.243 77.877) (xy 166.497 77.877) (xy 166.497 78.67625) (xy 166.65575 78.835) (xy 166.845 78.838072) (xy 166.969482 78.825812) (xy 167.08918 78.789502) (xy 167.199494 78.730537) (xy 167.296185 78.651185) (xy 167.375537 78.554494) (xy 167.434502 78.44418) (xy 167.470812 78.324482) (xy 167.483072 78.2) (xy 167.48 78.03575) (xy 167.32125 77.877) (xy 166.497 77.877) (xy 166.243 77.877) (xy 165.41875 77.877) (xy 165.26 78.03575) (xy 165.256928 78.2) (xy 162.403072 78.2) (xy 162.4 78.03575) (xy 162.24125 77.877) (xy 161.417 77.877) (xy 161.163 77.877) (xy 160.33875 77.877) (xy 160.18 78.03575) (xy 160.176928 78.2) (xy 158.016424 78.2) (xy 158.023072 78.1325) (xy 158.02 77.75575) (xy 157.86125 77.597) (xy 156.337 77.597) (xy 156.083 77.597) (xy 154.55875 77.597) (xy 154.4 77.75575) (xy 154.396928 78.1325) (xy 141.097 78.1325) (xy 141.097 75.35) (xy 149.641928 75.35) (xy 149.641928 77.05) (xy 149.654188 77.174482) (xy 149.690498 77.29418) (xy 149.749463 77.404494) (xy 149.828815 77.501185) (xy 149.925506 77.580537) (xy 150.03582 77.639502) (xy 150.155518 77.675812) (xy 150.28 77.688072) (xy 151.98 77.688072) (xy 152.104482 77.675812) (xy 152.22418 77.639502) (xy 152.334494 77.580537) (xy 152.431185 77.501185) (xy 152.510537 77.404494) (xy 152.569502 77.29418) (xy 152.605812 77.174482) (xy 152.617192 77.058938) (xy 152.740313 77.021589) (xy 152.894059 76.939411) (xy 153.028817 76.828817) (xy 153.046311 76.8075) (xy 154.396928 76.8075) (xy 154.4 77.18425) (xy 154.55875 77.343) (xy 156.083 77.343) (xy 156.083 76.33125) (xy 156.337 76.33125) (xy 156.337 77.343) (xy 157.86125 77.343) (xy 158.02 77.18425) (xy 158.023072 76.8075) (xy 158.010812 76.683018) (xy 157.974502 76.56332) (xy 157.915537 76.453006) (xy 157.836185 76.356315) (xy 157.739494 76.276963) (xy 157.62918 76.217998) (xy 157.509482 76.181688) (xy 157.385 76.169428) (xy 156.49575 76.1725) (xy 156.337 76.33125) (xy 156.083 76.33125) (xy 155.92425 76.1725) (xy 155.035 76.169428) (xy 154.910518 76.181688) (xy 154.79082 76.217998) (xy 154.680506 76.276963) (xy 154.583815 76.356315) (xy 154.504463 76.453006) (xy 154.445498 76.56332) (xy 154.409188 76.683018) (xy 154.396928 76.8075) (xy 153.046311 76.8075) (xy 153.056534 76.795044) (xy 154.26505 75.586529) (xy 154.298817 75.558817) (xy 154.409411 75.424059) (xy 154.491589 75.270313) (xy 154.505587 75.224167) (xy 154.546595 75.300887) (xy 154.657038 75.435462) (xy 154.791613 75.545905) (xy 154.945149 75.627972) (xy 155.111745 75.678508) (xy 155.284999 75.695572) (xy 157.135001 75.695572) (xy 157.308255 75.678508) (xy 157.474851 75.627972) (xy 157.628387 75.545905) (xy 157.762962 75.435462) (xy 157.873405 75.300887) (xy 157.884569 75.28) (xy 159.118422 75.28) (xy 160.176928 76.338507) (xy 160.176928 76.425) (xy 160.193512 76.593377) (xy 160.242625 76.755283) (xy 160.3207 76.901351) (xy 160.284463 76.945506) (xy 160.225498 77.05582) (xy 160.189188 77.175518) (xy 160.176928 77.3) (xy 160.18 77.46425) (xy 160.33875 77.623) (xy 161.163 77.623) (xy 161.163 77.603) (xy 161.417 77.603) (xy 161.417 77.623) (xy 162.24125 77.623) (xy 162.4 77.46425) (xy 162.403072 77.3) (xy 162.390812 77.175518) (xy 162.363354 77.085) (xy 165.296646 77.085) (xy 165.269188 77.175518) (xy 165.256928 77.3) (xy 165.26 77.46425) (xy 165.41875 77.623) (xy 166.243 77.623) (xy 166.243 77.603) (xy 166.497 77.603) (xy 166.497 77.623) (xy 167.32125 77.623) (xy 167.48 77.46425) (xy 167.483072 77.3) (xy 167.470812 77.175518) (xy 167.434502 77.05582) (xy 167.375537 76.945506) (xy 167.3393 76.901351) (xy 167.417375 76.755283) (xy 167.466488 76.593377) (xy 167.483072 76.425) (xy 167.483072 76.338506) (xy 168.185049 75.63653) (xy 168.218817 75.608817) (xy 168.259852 75.558817) (xy 168.329411 75.474059) (xy 168.411589 75.320314) (xy 168.462195 75.15349) (xy 168.467119 75.103491) (xy 168.475 75.023477) (xy 168.475 75.023469) (xy 168.479281 74.98) (xy 168.475 74.936531) (xy 168.475 72.148072) (xy 168.59 72.148072) (xy 168.714482 72.135812) (xy 168.83418 72.099502) (xy 168.944494 72.040537) (xy 169.041185 71.961185) (xy 169.120537 71.864494) (xy 169.179502 71.75418) (xy 169.215812 71.634482) (xy 169.228072 71.51) (xy 169.228072 67.71) (xy 169.215812 67.585518) (xy 169.179502 67.46582) (xy 169.120537 67.355506) (xy 169.041185 67.258815) (xy 168.944494 67.179463) (xy 168.83418 67.120498) (xy 168.714482 67.084188) (xy 168.59 67.071928) (xy 166.59 67.071928) (xy 166.465518 67.084188) (xy 166.34582 67.120498) (xy 166.235506 67.179463) (xy 166.138815 67.258815) (xy 166.059463 67.355506) (xy 166.000498 67.46582) (xy 165.964188 67.585518) (xy 165.951928 67.71) (xy 165.951928 68.725) (xy 162.912621 68.725) (xy 162.879502 68.61582) (xy 162.820537 68.505506) (xy 162.783191 68.46) (xy 162.820537 68.414494) (xy 162.879502 68.30418) (xy 162.915812 68.184482) (xy 162.928072 68.06) (xy 162.925 67.59575) (xy 162.76625 67.437) (xy 161.417 67.437) (xy 161.417 67.457) (xy 161.163 67.457) (xy 161.163 67.437) (xy 159.81375 67.437) (xy 159.655 67.59575) (xy 159.651928 68.06) (xy 159.664188 68.184482) (xy 159.700498 68.30418) (xy 159.759463 68.414494) (xy 159.796809 68.46) (xy 159.759463 68.505506) (xy 159.700498 68.61582) (xy 159.664188 68.735518) (xy 159.651928 68.86) (xy 159.651928 70.36) (xy 159.664188 70.484482) (xy 159.700498 70.60418) (xy 159.759463 70.714494) (xy 159.796809 70.76) (xy 159.759463 70.805506) (xy 159.700498 70.91582) (xy 159.667379 71.025) (xy 157.826579 71.025) (xy 157.648072 70.846493) (xy 157.648072 69.585) (xy 157.631008 69.411746) (xy 157.580472 69.24515) (xy 157.498405 69.091614) (xy 157.477567 69.066223) (xy 157.540537 68.989494) (xy 157.599502 68.87918) (xy 157.635812 68.759482) (xy 157.648072 68.635) (xy 157.645 67.59575) (xy 157.48625 67.437) (xy 156.337 67.437) (xy 156.337 67.457) (xy 156.083 67.457) (xy 156.083 67.437) (xy 154.93375 67.437) (xy 154.775 67.59575) (xy 154.771928 68.635) (xy 154.784188 68.759482) (xy 154.820498 68.87918) (xy 154.879463 68.989494) (xy 154.942433 69.066223) (xy 154.921595 69.091614) (xy 154.839528 69.24515) (xy 154.788992 69.411746) (xy 154.771928 69.585) (xy 154.771928 70.036493) (xy 153.074951 71.733471) (xy 153.041184 71.761183) (xy 153.013471 71.794951) (xy 153.013468 71.794954) (xy 152.93059 71.895941) (xy 152.848412 72.049687) (xy 152.797805 72.21651) (xy 152.780719 72.39) (xy 152.785001 72.433479) (xy 152.785 74.563421) (xy 152.439489 74.908933) (xy 152.431185 74.898815) (xy 152.334494 74.819463) (xy 152.22418 74.760498) (xy 152.143534 74.736034) (xy 152.227588 74.660269) (xy 152.401641 74.42692) (xy 152.526825 74.164099) (xy 152.571476 74.01689) (xy 152.450155 73.787) (xy 151.257 73.787) (xy 151.257 73.807) (xy 151.003 73.807) (xy 151.003 73.787) (xy 149.809845 73.787) (xy 149.688524 74.01689) (xy 149.733175 74.164099) (xy 149.858359 74.42692) (xy 150.032412 74.660269) (xy 150.116466 74.736034) (xy 150.03582 74.760498) (xy 149.925506 74.819463) (xy 149.828815 74.898815) (xy 149.749463 74.995506) (xy 149.690498 75.10582) (xy 149.654188 75.225518) (xy 149.641928 75.35) (xy 141.097 75.35) (xy 141.097 73.30311) (xy 149.688524 73.30311) (xy 149.809845 73.533) (xy 151.003 73.533) (xy 151.003 72.339186) (xy 151.257 72.339186) (xy 151.257 73.533) (xy 152.450155 73.533) (xy 152.571476 73.30311) (xy 152.526825 73.155901) (xy 152.401641 72.89308) (xy 152.227588 72.659731) (xy 152.011355 72.464822) (xy 151.761252 72.315843) (xy 151.486891 72.218519) (xy 151.257 72.339186) (xy 151.003 72.339186) (xy 150.773109 72.218519) (xy 150.498748 72.315843) (xy 150.248645 72.464822) (xy 150.032412 72.659731) (xy 149.858359 72.89308) (xy 149.733175 73.155901) (xy 149.688524 73.30311) (xy 141.097 73.30311) (xy 141.097 69.21527) (xy 141.263021 69.326201) (xy 141.833554 69.562524) (xy 142.439229 69.683) (xy 143.056771 69.683) (xy 143.662446 69.562524) (xy 144.232979 69.326201) (xy 144.746446 68.983114) (xy 145.183114 68.546446) (xy 145.526201 68.032979) (xy 145.762524 67.462446) (xy 145.883 66.856771) (xy 145.883 66.239229) (xy 145.832431 65.985) (xy 154.771928 65.985) (xy 154.775 67.02425) (xy 154.93375 67.183) (xy 156.083 67.183) (xy 156.083 65.50875) (xy 156.337 65.50875) (xy 156.337 67.183) (xy 157.48625 67.183) (xy 157.645 67.02425) (xy 157.646372 66.56) (xy 159.651928 66.56) (xy 159.655 67.02425) (xy 159.81375 67.183) (xy 161.163 67.183) (xy 161.163 66.08375) (xy 161.417 66.08375) (xy 161.417 67.183) (xy 162.76625 67.183) (xy 162.925 67.02425) (xy 162.928072 66.56) (xy 162.915812 66.435518) (xy 162.879502 66.31582) (xy 162.820537 66.205506) (xy 162.741185 66.108815) (xy 162.644494 66.029463) (xy 162.53418 65.970498) (xy 162.414482 65.934188) (xy 162.29 65.921928) (xy 161.57575 65.925) (xy 161.417 66.08375) (xy 161.163 66.08375) (xy 161.00425 65.925) (xy 160.29 65.921928) (xy 160.165518 65.934188) (xy 160.04582 65.970498) (xy 159.935506 66.029463) (xy 159.838815 66.108815) (xy 159.759463 66.205506) (xy 159.700498 66.31582) (xy 159.664188 66.435518) (xy 159.651928 66.56) (xy 157.646372 66.56) (xy 157.648072 65.985) (xy 157.635812 65.860518) (xy 157.599502 65.74082) (xy 157.540537 65.630506) (xy 157.461185 65.533815) (xy 157.364494 65.454463) (xy 157.25418 65.395498) (xy 157.134482 65.359188) (xy 157.01 65.346928) (xy 156.49575 65.35) (xy 156.337 65.50875) (xy 156.083 65.50875) (xy 155.92425 65.35) (xy 155.41 65.346928) (xy 155.285518 65.359188) (xy 155.16582 65.395498) (xy 155.055506 65.454463) (xy 154.958815 65.533815) (xy 154.879463 65.630506) (xy 154.820498 65.74082) (xy 154.784188 65.860518) (xy 154.771928 65.985) (xy 145.832431 65.985) (xy 145.762524 65.633554) (xy 145.526201 65.063021) (xy 145.41527 64.897) (xy 205.03273 64.897) ) ) ) (zone (net 55) (net_name GND) (layer B.Cu) (tstamp 0) (hatch edge 0.508) (connect_pads (clearance 0.508)) (min_thickness 0.254) (fill yes (arc_segments 32) (thermal_gap 0.508) (thermal_bridge_width 0.508)) (polygon (pts (xy 209.55 109.22) (xy 140.97 109.22) (xy 140.97 64.77) (xy 209.55 64.77) ) ) (filled_polygon (pts (xy 204.921799 65.063021) (xy 204.685476 65.633554) (xy 204.565 66.239229) (xy 204.565 66.856771) (xy 204.685476 67.462446) (xy 204.921799 68.032979) (xy 205.264886 68.546446) (xy 205.701554 68.983114) (xy 206.215021 69.326201) (xy 206.785554 69.562524) (xy 207.391229 69.683) (xy 208.008771 69.683) (xy 208.614446 69.562524) (xy 209.184979 69.326201) (xy 209.423 69.167161) (xy 209.423 104.928839) (xy 209.184979 104.769799) (xy 208.614446 104.533476) (xy 208.008771 104.413) (xy 207.391229 104.413) (xy 206.785554 104.533476) (xy 206.215021 104.769799) (xy 205.701554 105.112886) (xy 205.264886 105.549554) (xy 204.921799 106.063021) (xy 204.685476 106.633554) (xy 204.565 107.239229) (xy 204.565 107.856771) (xy 204.685476 108.462446) (xy 204.921799 109.032979) (xy 204.961904 109.093) (xy 145.486096 109.093) (xy 145.526201 109.032979) (xy 145.762524 108.462446) (xy 145.883 107.856771) (xy 145.883 107.239229) (xy 145.762524 106.633554) (xy 145.526201 106.063021) (xy 145.183114 105.549554) (xy 144.746446 105.112886) (xy 144.232979 104.769799) (xy 143.662446 104.533476) (xy 143.056771 104.413) (xy 142.439229 104.413) (xy 141.833554 104.533476) (xy 141.263021 104.769799) (xy 141.097 104.88073) (xy 141.097 75.35) (xy 149.641928 75.35) (xy 149.641928 77.05) (xy 149.654188 77.174482) (xy 149.690498 77.29418) (xy 149.749463 77.404494) (xy 149.828815 77.501185) (xy 149.925506 77.580537) (xy 150.03582 77.639502) (xy 150.155518 77.675812) (xy 150.28 77.688072) (xy 151.98 77.688072) (xy 152.104482 77.675812) (xy 152.22418 77.639502) (xy 152.334494 77.580537) (xy 152.431185 77.501185) (xy 152.510537 77.404494) (xy 152.569502 77.29418) (xy 152.605812 77.174482) (xy 152.618072 77.05) (xy 152.618072 75.35) (xy 152.605812 75.225518) (xy 152.569502 75.10582) (xy 152.510537 74.995506) (xy 152.431185 74.898815) (xy 152.334494 74.819463) (xy 152.22418 74.760498) (xy 152.143534 74.736034) (xy 152.227588 74.660269) (xy 152.401641 74.42692) (xy 152.526825 74.164099) (xy 152.571476 74.01689) (xy 152.450155 73.787) (xy 151.257 73.787) (xy 151.257 73.807) (xy 151.003 73.807) (xy 151.003 73.787) (xy 149.809845 73.787) (xy 149.688524 74.01689) (xy 149.733175 74.164099) (xy 149.858359 74.42692) (xy 150.032412 74.660269) (xy 150.116466 74.736034) (xy 150.03582 74.760498) (xy 149.925506 74.819463) (xy 149.828815 74.898815) (xy 149.749463 74.995506) (xy 149.690498 75.10582) (xy 149.654188 75.225518) (xy 149.641928 75.35) (xy 141.097 75.35) (xy 141.097 73.30311) (xy 149.688524 73.30311) (xy 149.809845 73.533) (xy 151.003 73.533) (xy 151.003 72.339186) (xy 151.257 72.339186) (xy 151.257 73.533) (xy 152.450155 73.533) (xy 152.571476 73.30311) (xy 152.526825 73.155901) (xy 152.401641 72.89308) (xy 152.227588 72.659731) (xy 152.011355 72.464822) (xy 151.761252 72.315843) (xy 151.486891 72.218519) (xy 151.257 72.339186) (xy 151.003 72.339186) (xy 150.773109 72.218519) (xy 150.498748 72.315843) (xy 150.248645 72.464822) (xy 150.032412 72.659731) (xy 149.858359 72.89308) (xy 149.733175 73.155901) (xy 149.688524 73.30311) (xy 141.097 73.30311) (xy 141.097 69.21527) (xy 141.263021 69.326201) (xy 141.833554 69.562524) (xy 142.439229 69.683) (xy 143.056771 69.683) (xy 143.662446 69.562524) (xy 144.232979 69.326201) (xy 144.746446 68.983114) (xy 145.183114 68.546446) (xy 145.526201 68.032979) (xy 145.762524 67.462446) (xy 145.883 66.856771) (xy 145.883 66.239229) (xy 145.762524 65.633554) (xy 145.526201 65.063021) (xy 145.41527 64.897) (xy 205.03273 64.897) ) ) ) )